PRESS SHOP : FACILITIES

(a) Manufacturing of Stator and Rotor Blanks by:

     250 Ton Blanking  Line CNC Press

     500 Ton Single Action Power Press

     300 Ton Single Action Power Press

(b) Manufacturing of  Poles & Rims by:

      1600 Ton 4 Cranks Single Action  Power Press

       200 Ton Double Crank Power Press

       150 Ton Single Action Power Press

       120 Ton Single Action Power Press

(c) Manufacturing of  Stator, Rotor & Armature Laminations Notching by:

     N16N - A1000-6-C 63 CNC Autonotching Press

     N8-A800-6-C40 CNC Autonotching Press

Both the machines having six stations as follows: -

Station 1- Destacking of blanks.
Station 2-  Orientation / Disorientation  of  Stator  or  Rotor   blanks  and Keyway                    marking.
Station 3-  Notching  of  Stator  and  separating  of   Rotor  or  Rotor  Notching.
Station 4-  Depositing of Stator Laminations.
Station 5-  Shaft hole in Rotor Laminations.
Station 6-  Stacking Rotor Laminations / Blanks.

N16N  Segmental  Notching  Press is  capable to  notch   both  circular and  
segmental laminations.

      12.5 Ton Circular Notching Machine

      6 Ton Stator Notching Machine

      6 Ton Rotor Notching Machine

      40 Ton Open Front inclined Notching Machine

(d) Core Building of Main Pole / Compole by:

      75 Ton Hydraulic Closed Frame Vertical Press

      150 Ton Hydraulic Closed Frame Vertical Press

(e) Core Plate Varnishing Plant for insulation

      The silicon steel electrical laminations which are used to manufacture the core  of 
      turbo and hydro generators and other electrical machines are  insulated as   per 
      the    requirement.    The    plant   consists   of    Deburring   unit,   Preheating 
       zone, Varnishing  unit Cooling zone.

(f)  Vertical   Spindle  Surface  Grinding  Machine   for  re-sharpening   of  
       heavy  press  tools.

(g)  Projection  Welding Machine for welding of ventilation spacers to the
        motor  stamping.

(h)  Spot Welding Machines for welding end  stamping.

(i)   Grinding Master for deburring of laminations.