-
DESIGN
FOR NEW SERIES OF HT ALTERNATORS IN THE RANGE OF 18-25 MW DEVELOPED TO
BROADEN THE RANGE OF HT ALTERNATORS.
-
FLAMEPROOF TERMINAL BOX FOR HIGHER FAULT LEVEL DEVELOPED AS A REPLACEMENT
FOR IMPORTED TERMINAL BOX
-
HARDWARE FOR LINE 7 MOTORS REDUCED FROM 6 SIZES TO 3 SIZES
-
PAINTING OF COOLING TUBES FOR TETV MOTORS IN PLACE OF ZINC PLATING
-
VERTICAL SCIM (2250 KW,11KV,332 RPM) CAPABLE FOR TAKING 60 TONS TOTAL
DOWNWARD THRUST DEVELOPED FOR M/S NTPC RIHAND THRU KBL.
-
OPTIMISED DESIGN FOR 5-6 MW ALTERNATORS DEVELOPED RESULTING INTO MATERIAL
COST SAVING OF 10% .
-
5 MVA
GENERATOR FOR TEST PLANT DEVELOPED BY REVERSE ENGINEERING .
-
VERTICAL SCIM IN H-MODULE CONSTRUCTION (1400 STATOR OD) DEVELOPED FOR M/S
SURATGARH TPP.
-
25%
REDUCTION IN CACW COOLER COST BY INCREASING NO. OF VENDORS AND DEVELOPING
HEALTHY COMPETITION
-
REPLACEMENT OF 600KW,1000RPM ANSALDO MAKE MOTOR FOR NTPC FARAKKA
-
REPLACEMENT OF 1241 KW,1500 RPM AEI MAKE MOTOR FOR M/S ACC.
-
VERTICAL FRAME IN 620 STATOR OD DEVELOPED FOR 10 NOS MACHINES FOR M/S
NPCIL
-
EXPORT
ORDERS EXECUTED FOR BANGALADESH,JAPAN, INDONESIA, NETHERLAND
-
REPLACEMENT OF AEI MAKE MOTOR FOR TRIPOLI WEST, LIBYA
-
REPEAT
EXPORT ORDER RECEIVED FROM M/S UNOZAWA,JAPAN.
